Stainless steel seamless pipe is long steel with a hollow section and no joints on the periphery.

The thicker the wall thickness of the product, the more economical and practical it is. The thinner the wall thickness, the processing cost will rise significantly; the process of the product determines its limited performance. Generally, seamless steel pipes have low precision: The wall thickness is uneven and the brightness of the inside and outside of the pipe is low, so it is used as a pipeline for transporting fluids, such as pipelines for transporting oil, natural gas, gas, water and certain solid materials.

The seamless steel pipe does not refer to the seam of two splicings, but the steel pipe itself is seamless. Ordinary steel pipes are called welded steel pipes, which are made of steel plates rolled up and welded with seams. They have the following characteristics:

1. The thicker the wall thickness of the product, the more economical and practical it is, and the thinner the wall thickness, its processing cost will rise substantially.

2. The process of this product determines its limited performance. Generally, seamless steel pipes have low precision: uneven wall thickness, low brightness on the inside and outside of the pipe, high cost of sizing, and there are pits and black spots on the inside and outside that are not easy to remove.

3. Its detection and shaping must be processed offline. Therefore, it embodies its superiority in terms of high-pressure, high-strength, and mechanical structural materials.

Huzhou Nanxun Yintuo Special Material Technology Co., Ltd. is a factory specializing in the production of austenitic stainless steel seamless pipe. Please contact us if you have any requirements.